OTS-1HD2DTR_1 Datasheet, PDF (2/2 Pages) –

NOTE: The systems in this category offer transmission of certain signals in set
configurations. If your application involves multi-signal transmission and/or would
benefit from system upgradeability, please visit the Optiva™ Platform section on
page 14. To configure an Optiva™ system to your precise needs, please register for
the ‘Product Configurator’ at www.opticomm.com
SDI & HD-SDI
Video
Standard
Pathological Test Code
Nominal Bit Rate
Bit error rate
Connector
SMPTE 292M & 259M
RP-178
1.485 Gbps; 270 Mbps
10^-14
BNC (IEC 60169-8; Gold Plated)
Data
Connector
RS-232, RS-422
Data Rate
RS-485 (2 Wire)
Data Rate
RS-485 (4 Wire)
Data Rate
Contact Closure
Data Rate
Micro DB25
DC to 1 Mbps
DC to 1 Mbps
DC to 1 Mbps
DC to 1 Mbps
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Operating voltage
Consumption
System Latency
Insert Card (IC): 6.3” L x 0.8” W x 4.0” H
-20° C to +55° C
-40° C to +85° C
0 to 95% non-condensing
9-12 VDC
1A Max per Insert Card
Less than 1ms
Local Monitoring
Remote Monitoring
LED Status Indication
Compatible with OptivaView™
SNMP Management Suite
11 oz
Optiva^™ Configurable
Communication Platform
Network Management
SDI & HD-SDI
Composite Video,
Audio & Data
RGB/VGA/DVI
Audio/FSK/Intercom
Data (Ethernet/Serial/USB)
CATV/RF & L-Band
Optical Switching, Routing
& Redundancy
Passive Multiplexing
Solutions
Enclosures, Racks
& Frames
Power Supplies
& Accessories
Sample Configuration
HD-SDI
OTS-1HDT2DTR
Local Loopback
Emissions: FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity: ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety: UL1950, CAN/CSA 22.2,
NO.950-95
MADE IN THE USA
HD-SDI
OTS-1HDR2DTR
Second Output