MMV-110STANDARD Datasheet, PDF (2/2 Pages) –

CCTV Security
Networking
Video
Video in/out impedance
Video in/out level
Video bandwidth
Differential gain
Differential phase
Linearity
Tilt
Compatibility
Signal to noise ratio
Connector type
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Operating voltage
Vibration
Shock
Diagnostics
Status monitoring
75 Ω
1 volt peak to peak, 1.5 volts max
10 Hz to 15 MHz @ -3dB
< ± 1.5 % typical
< 1.5° typical
± 1.1 % typical
≤ 0.5 % typical
NTSC, PAL, SECAM, RS-170, RS-170A
>67 dB using RS-250C standards @ 1 km
BNC
Stand Alone (SA): 3.5” L x 2.3” W x 1.0” H
Insert card (IC): 6.3” L x 0.8” W x 4.0” H
-30° C to +60° C
-55° C to +85° C
0 to 95% non-condensing
12 VDC (200 mA) or 24 VAC (300 mA)
Up to 5 g's
Up to 12 g's
LED indicator
60 oz
11 oz
Selection Guide
Digital Broadcast
AAMM//IIMM AAnnalog
SWFM Analog
Analog-to-Digital
RGB Video
Datacom
RF CATV
Appendix
Opticomm
reserves the
right to change
product
specifications
without notice.
Sample Configuration
Emissions: FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity: ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety: UL1950, CAN/CSA 22.2,
NO.950-95
MADE IN THE USA
33