|
FMV-595_1 Datasheet, PDF (2/2 Pages) – | |||
|
◁ |
FM Video/Audio/Data
Transmission
Video
Video in/out impedance
Video in/out level
Video bandwidth
Differential gain
Differential phase
Linearity
Tilt
Compatibility
Signal to noise ratio
FM carrier frequency
Connector type
Audio
Audio in/out impedance
Audio in/out level
Frequency response
Signal to noise ratio
Total harmonic distortion
Connector type
Data
Data rate
Bit error rate
Data formats available
Connector type
General
Dimensions & Weight
Temperature
Humidity
Operating voltage
Vibration/Shock
Diagnostics
Status monitoring
75 â¦
1 volt peak to peak, 1.5 volts max
5 Hz to 7 MHz @ -3dB
< 1.0 % typical
< 1.0° typical
± 1.1 % typical
⤠0.5 % typical
NTSC, PAL, SECAM, RS-170, RS-170A
>67 dB using RS-250C standards @ 1 km
70 MHz
BNC
600 ⦠or 10k ⦠â balanced or unbalanced
-6 to +6 dBm
10 Hz to 20 KHz
> 60 dB
< 1.0 %, 1 KHz at maximum modulation
Hi-density 15 pin DB9 (DE15)
DC to 300 Kbps
10-9
Async RS-232, RS-422, RS-485/2W, Genlock, Manchester,
20 mA current loop, TTL, or six Contact Closures
Hi-density 15 pin DB9 (DE15)
Stand Alone (SA): 7.16â L x 5.21â W x .94â H 39 oz
Insert Card (IC): 6.3â L x 0.8â W x 4.0â H
16 oz
Operating: -20° C to +70° C; Storage; -30° C to +85° C
0 to 95% non-condensing
12 VDC (200 mA) or 9-24 VAC (6W) or 110/220 VAC
Up to 5 g's/Up to 12 g's
LED indicator
Sample Configuration
Emissions: FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity: ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety: UL1950, CAN/CSA 22.2,
NO.950-95
MADE IN THE USA
|