FMV-593 Datasheet, PDF (2/2 Pages) –

CCTV Security
Networking
Video
Video in/out impedance
Video in/out level
Video bandwidth
Differential gain
Differential phase
Linearity
Tilt
Compatibility
Signal to noise ratio
FM carrier frequency
Connector type
Audio
Audio in/out impedance
Audio in/out level
Frequency response
Signal to noise ratio
Total harmonic distortion
Connector type
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Operating voltage
Vibration
Shock
Diagnostics
Status monitoring
75 Ω
1 volt peak to peak, 1.5 volts max
5 Hz to 8 MHz @ -3dB
< 1.0 % typical
< 1.0° typical
± 1.1 % typical
≤ 0.5 % typical
NTSC, PAL, SECAM, RS-170, RS-170A
>67 dB using RS-250C standards @ 1 km
70 MHz
BNC
600 Ω (balanced) or 10 kΩ (unbalanced)
-6 to +6 dBm
10 Hz to 20 KHz
> 60 dB
< 1.0 %, 1 KHz at maximum modulation
Hi-density 15 pin DB9 (DE15)
Stand Alone (SA): 7.16” L x 6.51” W x 1.75” H
Insert Card (IC): 6.3” L x 1.7” W x 4.0” H
-40° C to +74° C
-55° C to +85° C
0 to 95% non-condensing
9 VDC (300 mA) or 110/220 VAC
Up to 5 g's
Up to 12 g's
53 oz
29 oz
LED indicator
Sample Configuration
Selection Guide
Digital Broadcast
AM/IM Analog
SSWWFFMM AAnnalog
Analog-to-Digital
RGB Video
Datacom
RF CATV
Appendix
Opticomm
reserves the
right to change
product
specifications
without notice.
Emissions: FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity: ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety: UL1950, CAN/CSA 22.2,
NO.950-95
MADE IN THE USA
91