FMV-100K Datasheet, PDF (2/2 Pages) –

Audio/FSK/Intercom
Specifications
System Bandwidth
Input Impedance
Output Impedance
Analog Input Level
Signal to Noise Ratio
Delay in Output Signal
Connector Type
Indicators
300Hz to 100kHz
150 Ohm and 600 Ohm, balanced
150 Ohm and 600 Ohm, balanced
100mVrms - 1 Vrms
>60 dB
15 us max.
DB15 HD Female for FMV-100K/TR-T50R10-FC-IC
DB15 HD Male for FMV-100K/TR-T10R50-FC-IC
1. Electrical input signal detect
2. Electrical output signal detect
3. Optical signal detect
4. Optical output enabled
5. Card power status
Optical Specifications
Cable Compatibility
FiberOptic Connector
Operating Wavelength
Optical Budget Loss
Laser Class
9/125 micron single-mode
FC/PC (singlemode)
Bi-directional CWDM transmission using 1550nm and 1510nm
wavelengths.
0-30 dB (SM @1550nm/1510nm)
Class 1
General
Dimensions & Weight
System Design
Connectors
Insert Card: 7.1” L x 0.8” W x 5.05” H
~ 0.6 lb.
Insert card to be installed inside the CC-16B 19” subrack frame,
3U high
Electrical and fiber connectors are accessible from the front
Environmental
Operating Temperature
Operating Relative Humidity
Storage Temperature
Storage Relative Humidity
Cooling
Shock & Vibration
MTBF
-20°C to +70°C
95% @ 55° C, non-condensing
-40°C to +70°C
94% @ 65°C, non-condensing
Convection cooling
Sinusaidal, 5 to 200Hz at 1.5g peak
>400,000 Hours @ 30°C, Ground Benign, per MIL-HDBK-217F
Regulatory
CE Compliance
CSA Certification (FMV-100K System)
Opticomm reserves the right to change specifications without prior notice.
Optiva^™ Configurable
Communication Platform
Network Management
SDI & HD-SDI
Composite Video,
Audio & Data
RGB/VGA/DVI
Audio/FSK/Intercom
Data (Ethernet/Serial/USB)
CATV/RF & L-Band
Optical Switching, Routing
& Redundancy
Passive Multiplexing
Solutions
Enclosures, Racks
& Frames
Power Supplies
& Accessories
MADE IN THE USA
Sample Configuration