RGB-3003 Datasheet, PDF (1/2 Pages) –

RGB-3003
3-Fiber VGA 200 MHz
Hi-Resolution
200 MHz VGA/RGB Video System For
Ultra High Resolution Remote Displays
The RGB-3003 is a three-fiber Amplitude Modulated
(AM), LED- or Laser-based RGB Video transmission
system with a 15 Pin VGA interface port, which
provides H/V Sync or Composite External Sync or Sync
on Green or all three channels. It is ideal for the
extension of any high resolution Video signal such as a
CAD/CAM graphics workstation. Units come with a
built-in Automatic Gain Control (AGC) to maintain
constant Video output for each color.
System Design
Status indicators for: Power On, VGA H/V Sync present.
All units come as a Stand Alone version. Units can be
rack-mountable with optionally provided brackets for a
flat surface such as a desk top in a cabinet, or mounted
in a 19” Rack. RGB-3003 unit comes with internal 87-
264 VAC power supply that operates with a selectable
power supply. The regulated switching power supply
has short circuit protection, and an input operating
voltage of 110/220 VAC.
The RGB-3003 is also available in Y, Pb and Pr format
system configuration.
Features
• Ultra-high resolution (1840 x 1634)
• Multimode operation over 3 fibers
• 200 MHz video bandwidth
• Complies with RS-170, RS-170A & RS-343 EIA standards
• VGA/SVGA
• No EMI or RFI and no ground loops
• Stand Alone or Mounting Brackets
• Ideal for CAD/CAM workstation extensions
865 1310 1550
Type
Wavelength Fiber
Mode
Suffix
Type
Output
Power
Receiver
Sensitivity
Optical
Loss
Budget
Conn
Range* Type
•
LED
MM
L0
50 /125µ -13 dBm -20 dBm
7 dB
1 km
ST
•
62.5/125µ -10 dBm -20 dBm
10 dB
2 km
ST
•
Laser SM
L2
09/125µ
-8 dBm
-16 dBm
8 dB
8 km
FC
* Chromatic dispersion and additional losses should be taken into account
800-867-8426 • [e-mail] • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice