OTS-1V2ATR1DTR Datasheet, PDF (1/2 Pages) –

OTS-1V2ATR1DTR
Optiva^™ Standard,
1 Composite Video, 2 Duplex Analog Audio
and 1 Duplex RS-232/422/485 Data
Video
Audio
Data
Composite Video, Audio and Serial Data
Transmission
The OTS-1V2ATR1DTR provides for the
digital transmission of 1 Channel of
Composite Video, 2 Channels of Duplex
Analog Audio and 1 Channel of Duplex
Serial Data.
System Design
All units come in an insert card version.
The cards can be inserted into our 16-slot,
19” rack-mountable card cage (OT-CC-16-100)
or one of our smaller Optiva^™ Desktop
Card Racks (OT-DTCR Series).
The Optiva^™ Desktop Card Racks can handle
one, two or four insert cards, creating
compact, mountable, stand alone systems.
The use of separate OT-DTCR enclosures
allows for future flexibility and expansion as
all cards are hot-swappable and can be used
in any enclosure. Each one of our card
housing units operate with an appropriate
power supply. See “Accessories” for power
supply specifications.
Optiva^™ Upgrade Path
This system can be purchased without
an optical port as an add-on to an existing
Optiva^™ system daisy-chain.
(See “Non-Optical Version” below).
The Optiva^™ bandwidth requirement
of this system is 370 Mbps.
2 Analog
Audio In/Out
2 Analog
Audio Out/In
Each insert card comes with a label
Serial Data
Serial Data
identifying the specific protocols
S
A In/Out
S
A Out/In
handled, connector pin-out and other
T
L
A
E
T
L
A
E
vital information.
T
R
T
R
U
S
T _Composite
U
S
T _Composite
For optimal bandwidth allocation,
Video In
Video Out
each insert card can daisy-chain with
an additional card in the same chassis.
ST, Dual LC,
ST, Dual LC, See “Optiva^™ Upgrade Path”.
SC or FC
SC or FC
Optiav^™
VAD Transmission
Optiav^™
VAD Transmission
OTS-1VT2ATR1DTR OTS-1VR2ART1DRT
Features
• Composite Video, Analog Audio and Serial Data
• 10-Bit Digital Transmission
• TDM - Single fiber, dual wavelength
• Complies with SMPTE standards for Video transmission
• Compatible with MDM-7000 Series for WDM and CWDM
multiplexing
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Ideal for Professional AV applications
Versions Available*
Wavelength (nm)
& Fiber
Transmit/Receive**
Receive/Transmit**
Optical Optical Budget Range***
Connector
(dB)
(km) Form Factor
1310/1550 Multimode
1310/1550 Singlemode
1310/1550 SM (D)
1310/1550 SM (H)
1270-1610 SM (CWDM)
OTS-1VT2ATR1DTR-A1/A3M-XX-IC
OTS-1VT2ATR1DTR-A2/A3-XX-IC
OTS-1VT2ATR1DTR-A2/A3D-XX-IC
OTS-1VT2ATR1DTR-A2/A3H-XX-IC
OTS-1VT2ATR1DTR-L4/L4-XX-IC
OTS-1VR2ATR1DRT-A3M/A1-XX-IC
OTS-1VR2ATR1DRT-A3/A2-XX-IC
OTS-1VR2ATR1DRT-A3D/A2-XX-IC
OTS-1VR2ATR1DRT-A3H/A2-XX-IC
OTS-1VR2ATR1DRT-L4/L4-XX-IC
ST, FC, Dual LC or SC
ST, FC, Dual LC or SC
ST, FC, Dual LC or SC
ST, FC, Dual LC or SC
ST, FC, Dual LC or SC
10
12
17
25
Varies
3
20
40
60
20-70
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
Non-Optical Version OTS-1VT2ATR1DTR-NOC-IC
OTS-1VR2ATR1DRT-NOC-IC
N/A
N/A
N/A
IC (1-slot)
Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm;
"ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z.
Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W).
* Contact Opticomm for other versions available.
** XX indicates the type of optical connector. Each of ST, FC, Dual LC or SC are available.
*** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • [e-mail] • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice