OTS-1V2A Datasheet, PDF (1/2 Pages) –

OTS-1V2A
Optiva^™ Standard,
1 Composite Video and 2 Audio
Video
Audio
Data
Composite Video and Audio
The OTS-1V2A provides for the digital
transmission of 1 Channel of Composite
Video and 2 Channels of Analog Audio.
System Design
All units come in an insert card version.
The cards can be inserted into our 16-slot,
19” rack-mountable card cage (OT-CC-16-100)
or one of our smaller Optiva^™ Desktop
Card Racks (OT-DTCR Series).
The Optiva^™ Desktop Card Racks can handle
one, two or four insert cards, creating
compact, mountable, stand alone systems.
The use of separate OT-DTCR enclosures
allows for future flexibility and expansion as
all cards are hot-swappable and can be used
in any enclosure. Each one of our card
housing units operate with an appropriate
power supply. See “Accessories” for power
supply specifications.
Optiva^™ Upgrade Path
This system can be purchased without
an optical port as an add-on to an existing
Optiva^™ system daisy-chain.
(See “Non-Optical Version” below).
The Optiva^™ bandwidth requirement
of this system is 361 Mbps.
Audio In
Audio Out Each insert card comes with a label
identifying the specific protocols
S
A
T
L
A
E
S
A
T
L
A
E
handled, connector pin-out and other
vital information.
T
R
T
R
U
S
T _Composite
Video In
U
S
T _Composite
Video Out
For optimal bandwidth allocation,
each insert card can daisy-chain with
an additional card in the same chassis.
ST, LC,
SC or FC
ST, LC,
SC or FC
See “Optiva^™ Upgrade Path”.
Optiav^™
VAD Transmission
Optiav^™
VAD Transmission
OTS-1VT2AT
OTS-1VR2AR
Features
• Composite Video and Analog Audio over one fiber
• 10-Bit Digital Transmission
• TDM - Single Wavelength
• Complies with SMPTE standards for Video transmission
• Compatible with MDM-7000 Series for WDM and CWDM
multiplexing
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Ideal for AV applications
Versions Available*
Wavelength (nm)
& Fiber
Transmit**
Receive**
Optical
Connector
Optical Budget Range***
(dB)
(km) Form Factor
1310 Multimode
1310 Singlemode
1310 Singlemode(D)
1550 Singlemode
1550 Singlemode (D)
1270-1610 SM (CWDM)
OTS-1VT2AT-A1-XX-IC
OTS-1VT2AT-A2-XX-IC
OTS-1VT2AT-A2D-XX-IC
OTS-1VT2AT-A3-XX-IC
OTS-1VT2AT-A3D-XX-IC
OTS-1VT2AT-L4-XX-IC
OTS-1VR2AR-A1-XX-IC
OTS-1VR2AR-A2-XX-IC
OTS-1VR2AR-A2D-XX-IC
OTS-1VR2AR-A3-XX-IC
OTS-1VR2AR-A3D-XX-IC
OTS-1VR2AR-L4-XX-IC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
10
7
12
17
25
Varies
3
10
20
40
60
20-70
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
Non-Optical Version
OTS-1VT2AT-NOC-IC
OTS-1VR2AR-NOC-IC
N/A
N/A
N/A
IC (1-slot)
Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm;
"ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z.
* Contact Opticomm for other versions available.
** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
*** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • [e-mail] • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice