OTS-1V1DTR Datasheet, PDF (1/2 Pages) –

OTS-1V1DTR
Optiva^™ Standard, 1 Composite Video
and 1 Duplex RS-232/422/485 Data
Video
Audio
Data
Composite Video and Data
The OTS-1V1DTR provides for the digital
transmission of 1 Channel of Composite
Video and 1 Channel of Duplex Serial Data.
System Design
All units come in an insert card version.
The cards can be inserted into our 16-slot,
19” rack-mountable card cage (OT-CC-16-100)
or one of our smaller Optiva^™ Desktop
Card Racks (OT-DTCR Series).
The Optiva^™ Desktop Card Racks can handle
one, two or four insert cards, creating
compact, mountable, stand alone systems.
The use of separate OT-DTCR enclosures
allows for future flexibility and expansion as
all cards are hot-swappable and can be used
in any enclosure. Each one of our card
housing units operate with an appropriate
power supply. See “Accessories” for power
supply specifications.
Optiva^™ Upgrade Path
This system can be purchased without
an optical port as an add-on to an existing
Optiva^™ system daisy-chain.
(See “Non-Optical Version” below).
The Optiva^™ bandwidth requirement
of this system is 360 Mbps.
1 Serial
Data In/Out
1 Serial
Data Out/In
Each insert card comes with a label
identifying the specific protocols
S
A
S
A
handled, connector pin-out and other
T
L
A
E
T
L
A
E
vital information.
T
R
T
R
U
S
T _Composite
U
S
T _Composite
For optimal bandwidth allocation,
Video In
Video Out
each insert card can daisy-chain with
an additional card in the same chassis.
ST, LC,
ST, LC,
See “Optiva^™ Upgrade Path”.
SC or FC
SC or FC
Optiav^™
VAD Transmission
Optiav^™
VAD Transmission
OTS-1VT1DTR
OTS-1VR1DRT
Features
• Composite Video and Serial Data over one fiber
• 10-Bit Digital Transmission
• TDM - Single fiber, dual wavelength
• Complies with SMPTE standards for Video transmission
• Compatible with MDM-7000 Series for WDM and CWDM
multiplexing
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Ideal for Camera PTZ applications
Versions Available*
Wavelength (nm)
& Fiber
Transmit/Receive**
Receive/Transmit**
Optical Optical Budget Range***
Connector
(dB)
(km) Form Factor
1310/1550 Multimode
1310/1550 Singlemode
1310/1550 SM (D)
1310/1550 SM (H)
1270-1610 SM (CWDM)
OTS-1VTDTR-A1/A3M-XX-IC
OTS-1VTDTR-A2/A3-XX-IC
OTS-1VTDTR-A2/A3D-XX-IC
OTS-1VTDTR-A2/A3H-XX-IC
OTS-1VTDTR-L4/L4-XX-IC
OTS-1VRDRT-A3M/A1-XX-IC
OTS-1VRDRT-A3/A2-XX-IC
OTS-1VRDRT-A3D/A2-XX-IC
OTS-1VRDRT-A3H/A2-XX-IC
OTS-1VRDRT-L4/L4-XX-IC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
10
12
17
25
Varies
3
20
40
60
20-70
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
Non-Optical Version OTS-1VTDTR-NOC-IC
OTS-1VRDRT-NOC-IC
N/A
N/A
Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W).
N/A IC (1-slot)
* Contact Opticomm for other versions available.
** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
*** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • [e-mail] • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice