|
OTS-1HD1ETR Datasheet, PDF (1/2 Pages) – | |||
|
OTS-1HD1ETR
Optiva⢠Standard,
1 HD-SDI 270/1485 Mbps w/Loopback
and 1 Duplex 10/100 Mbps Ethernet
Video
Audio
Data
Ethernet
HD-SDI Video and Ethernet Transmission
The OTS-1HD1ETR provides for the digital
transmission of 1 Channel of HD-SDI Video
with Loopback and 1 Channel of Duplex
10/100 Ethernet , at absolute broadcast
quality.
System Design
All units come in an insert card version.
The cards can be inserted into our 16-slot,
19â rack-mountable card cage (OT-CC-16-100)
or one of our smaller Optiva⢠Desktop
Card Racks (OT-DTCR Series).
The Optiva⢠Desktop Card Racks can handle
one, two or four insert cards, creating
compact, mountable, stand alone systems.
The use of separate OT-DTCR enclosures
allows for future flexibility and expansion as
all cards are hot-swappable and can be used
in any enclosure. Each one of our card
housing units operate with an appropriate
power supply. See âAccessoriesâ for power
supply specifications.
Optiva⢠Upgrade Path
This system can be purchased without
an optical port as an add-on to an existing
Optiva⢠system daisy-chain.
(See âNon-Optical Versionâ below).
The Optiva⢠bandwidth requirement
of this system is 2,056 Mbps.
Ethernet
Data In
Ethernet
Data Out
HD-SDI
Video In
HD-SDI
Video Out
Each insert card comes with a label
HD Video
HD Video
identifying the specific protocols
S
A Loopback
S
A Loopback
handled, connector pin-out and other
T
L Out
A
E
T
L Out
A
E
vital information.
T
R
T
R
U
T
S
U
T
S
For optimal bandwidth allocation,
each insert card can daisy-chain with
an additional card in the same chassis.
ST, LC,
SC or FC
ST, LC,
SC or FC
See âOptiva⢠Upgrade Pathâ.
Optiavâ¢
VAD Transmission
Optiavâ¢
VAD Transmission
OTS-1HDT1ETR OTS-1HDR1ERT
Features
⢠Uncompressed HD-SDI Video over one fiber
⢠TDM - Single fiber, dual wavelength
⢠Complies with SMPTE standards for Video transmission
⢠Compatible with MDM-7000 Series for WDM and CWDM
multiplexing
⢠No EMI or RFI and no ground loops
⢠Stand alone or rack-mount
⢠Ideal for Broadcast/Studio and Professional AV applications
Versions Available*
Wavelength (nm)
& Fiber
Transmit/Receive**
Receive/Transmit**
Optical Optical Budget Range***
Connector
(dB)
(km) Form Factor
1310/1550 Multimode OTS-1HDT1ETR-B1/B3M-XX-IC
1310/1550 Singlemode OTS-1HDT1ETR-B2/B3-XX-IC
1310/1550 Singlemode (D) OTS-1HDT1ETR-B2/B3D-XX-IC
1310/1550 Singlemode (H) OTS-1HDT1ETR-B2/B3H-XX-IC
1270-1610 SM (CWDM) OTS-1HDT1ETR-L4/L4-XX-IC
OTS-1HDR1ERT-B3M/B1-XX-IC
OTS-1HDR1ERT-B3/B2-XX-IC
OTS-1HDR1ERT-B3D/B2-XX-IC
OTS-1HDR1ERT-B3H/B2-XX-IC
OTS-1HDR1ERT-L4/L4-XX-IC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
10
12
17
25
Varies
1.5
20
40
60
20-70
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
Non-Optical Version OTS-1HDT2DTR-NOC-IC
OTS-1HDR2DTR-NOC-IC
N/A
N/A
Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W).
N/A IC (1-slot)
* Contact Opticomm for other versions available.
** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
*** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 ⢠info@opticomm.com ⢠www.opticomm.com ⢠Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
|
▷ |