OSP-201 Datasheet, PDF (1/1 Pages) –

OSP-201
CWDM 1 Channel Add/Drop Card
Optical Splitter
The OSP-201 enables the splitting of an optical signal onto two
separate optical fibers at power ratios of 50/50, 70/30 and 90/10.
System Design
With the OSP-201, you are able to input a fiber strand at a specified
wavelength and output two fibers, each at the same designated
wavelength. Power loss is specified by the relevant ratio of the
OSP-201 version (see below). The OSP-201 is perfect for
applications where common fiber count is limited and signals are
distributed to different locations dropped from a common path.
Features
OSP-201
Optical Splitter
Port A
Port B
• Varying Power Ratios for Network-Specific Configuration
• Optical Multicasting
• Drop the optical signal via a second fiber to each location
• Enhanced Optical Network Configuration
• Minimization of Optical Fiber
• Compatible with OptivaView™ SNMP Management Suite
Common
Port
Optiav^™
VAD Transmission
General Specifications
Insertion Loss
Dimensions & Weight
Operating Temperature
Storage Temperature
Relative Humidity
See versions below
Insert card (IC): 6.3” L x 0.8” W x 4.0” H; 10 oz
-5° C to +70° C
-40° C to +85° C
0-95%, Non-condensing
Optiva^™ Configurable
Communication Platform
Network Management
SDI & HD-SDI
Composite Video,
Audio & Data
RGB/VGA/DVI
Audio/FSK/Intercom
Data (Ethernet/Serial/USB)
CATV/RF & L-Band
Optical Switching, Routing
& Redundancy
Passive Multiplexing
Solutions
Enclosures, Racks
& Frames
Power Supplies
& Accessories
Versions Available
Model Number*
Wavelength (+/- 40nm) Splitting Ratio Maximum Insertion Loss
& Fiber Type
(dB)
OSP-201-1310-5050-XX-IC
OSP-201-1310-7030-XX-IC
OSP-201-1310-9010-XX-IC
OSP-201-1550-5050-XX-IC
OSP-201-1550-7030-XX-IC
OSP-201-1550-9010-XX-IC
1310nm Singlemode
1310nm Singlemode
1310nm Singlemode
1550nm Singlemode
1550nm Singlemode
1550nm Singlemode
50:50
70:30
90:10
50:50
70:30
90:10
Port A: 3.9; Port B 3.9
Port A: 2.1; Port B 6.4
Port A: 0.8; Port B 12.7
Port A: 3.9; Port B 3.9
Port A: 2.1; Port B 6.4
Port A: 0.8; Port B 12.7
*ST, FC, SC, and LC optical connectors are available. Please specify your preference (instead of "XX" in the model
number), when ordering.
MADE IN THE USA
800-867-8426 • [e-mail] • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice