FMV-603_1 Datasheet, PDF (1/2 Pages) –

FMV-603
Duplex V /Duplex 2A & D
Video
Audio
Data
Two-way Video with Two Audio and
One Data for PTZ Control
The FMV-603 is a duplex Video
transmission system with two duplex
Audio ports and a single duplex Data
port, ideal for CCTV cameras, PTZ
video conferencing, and ITS. Status
indicators on Video, Sync, FM Data,
carrier detect, voltage, temperature,
and optical levels are monitored via
LEDs.
System Design
All units come in a small module or
Insert Card version. The cards can be
inserted into our 18-slot, 19”
rackmountable card cage (CC-18-80W),
or one of our smaller Desk Top Card
Racks (DTCR series).
The Desk Top Card Racks can handle
one, two, four, or seven cards, allowing
for greater flexibility and future
expansion. They can sit on a flat
surface as a larger stand-alone unit, or
can be surface mounted with the
flanges provided. Each one of our card
housings operates with an appropriate
power supply. The regulated switching
power supply has short circuit
protection and an input operating
voltage of 85-265 VAC.
Features
• Multimode or singlemode operation over one fiber
• 8 MHz video bandwidth
• 10 Hz to 20 KHz audio bandwidth
• True DC restoration
• Flat frequency response
• Complies with RS-170 and RS-170A EIA video standards
• Compatible with NTSC, PAL and SECAM
• No EMI or RFI and no ground loops
• Stand Alone or Rack Mount
• Ideal for CCTV cameras, PTZ video conferencing,
and ITS
Optical
Wavelength Fiber Output Receiver
Loss
Conn
865 1310 1550 1270-1610 Type Mode Suffix
Type
Power Sensitivity
Budget Range*
Type
(CWDM)
•
•
LED MM L0/L1 50/125µ -16 dBm -34 dBm
18 dB
3 km
ST
•
•
62.5/125µ
••
LED MM L2/L3 09/125µ -10 dBm -34 dBm
24 dB
25 km
FC
•
Laser SM
L4
09/125µ -3 dBm -36 dBm
33 dB
25-90 km FC
* Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • [e-mail] • www.opticomm.com • Contact Opticomm for custom requirements.