English
Language : 

OVSAWBCR9 Datasheet, PDF (2/5 Pages) OPTEK Technologies – White PLCC4 Surface Mount LED
White PLCC4 Surface Mount LED
OVSAWBCR9
Absolute Maximum Ratings
TA = 25o C (on metal core PCB1) unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Soldering Temperature (5 second maximum)
Forward Current1
Peak Forward Current (10% Duty Cycle, 1 KHz)1
Reverse Voltage
Electrostatic Discharge
Power Dissipation
Note:
1. Maximum forward current for each die.
Electrical Characteristics
TA = 25o C (on metal core PCB1) unless otherwise noted
SYMBOL
IV
VF
IR
2½
PARAMETER
Luminous Intensity1
Forward Voltage2
Reverse Current2
50% Power Angle
x
Chromaticity Coordinates3
y
Notes:
1. When three LED die are operated simultaneously.
2. For each die.
3. The C.I.E. 1931 chromaticity diagram.
MIN
1045
----
----
----
----
----
TYP
1900
3.5
----
120
0.29
0.30
MAX
----
4.0
50
----
----
----
UNITS
mcd
V
µA
deg
----
----
Standard Bins (IF = 20mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown.
Orders for OVSAWBCR9 may be filled with any or all bins contained as below.
Rank
A0
B1
Chromaticity x 0.280 0.264 0.283 0.296 0.287 0.283 0.330 0.330
Coordinates y 0.248 0.267 0.305 0.276 0.295 0.305 0.360 0.339
Rank
B2
C0
Chromaticity x 0.296 0.287 0.330 0.330 0.330 0.330 0.361 0.356
Coordinates y 0.276 0.295 0.339 0.318 0.318 0.360 0.385 0.351
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. Pb content <1000 PPM.
3. To designate luminous intensity ranks, please contact OPTEK.
4. Part is sensitive to static electricity and precautions must be used when handling products.
-40 ~ + 85°C
-40 ~ + 100°C
260° C
25 mA
100 mA
5V
150 V
110 mW
CONDITIONS
IF = 20 mA
IF = 20 mA
VR = 5 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A .1 11/05
Page 2 of 5
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com