OVSAABLCR8 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Amber PLCC4 Surface Mount LED with Domed Lens

Amber PLCC4 SMD LED with Domed Lens
OVSAABLCR8
Absolute Maximum Ratings
T_A = 25^o C unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Soldering Temperature¹
Reverse Voltage
Continuous Forward Current
Peak Forward Current (10% Duty Cycle, PW ”  —VHF
Power Dissipation
Note:
1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics
T_A = 25^o C unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX UNITS
I_V
Luminous Intensity
900
1650
----
mcd
V_F
Forward Voltage
----
2.6
3.2
V
I_R
Reverse Current
----
----
10
µA
D
Dominant Wavelength
----
591
----
nm
P
Peak Wavelength
----
594
----
nm
2½
50% Power Angle
----
60
----
deg
Standard Bins (I_F = 50mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVSAABLCR8 may be filled with any or all bins contained as below.
-40 ~ +100°C
-40 ~ +100°C
260° C
5V
70 mA
200 mA
225 mW
CONDITIONS
I_F = 50 mA
I_F = 50 mA
V_R = 5 V
I_F = 50 mA
I_F = 50 mA
I_F = 50 mA
1400
1120
900
710
560
620
628
Dominant Wavelength (nm)
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
W1
V2
V1
U2
635
Luminous intensity is at
U2 bin or above.
Issue A 10/05
Page 2 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com