OVLLR8C7 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Cylindrical High-Intensity Red LED (5 mm)

Cylindrical High-Intensity Red LED (5 mm)
OVLLR8C7
Absolute Maximum Ratings
T_A = 25^o C unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (10% Duty Cycle, 1KHz)
Power Dissipation
Lead Soldering Temperature (4mm from the base of the epoxy bulb)¹
LED Junction Temperature
Current Linearity vs. Ambient Temperature
Note:
1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics
T_A = 25^oC unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
I_v
V_F
I_R
P
D
2 ½H-H
Luminous Intensity
Forward Voltage
Reverse Current
Peak Wavelength
Dominant Wavelength
50% Power Angle
415
570
----
mcd
----
2.2
2.6
V
----
----
10
µA
----
633
----
nm
----
623
----
nm
----
85
----
deg
Standard Bins (I_F = 20 mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVLLR8C7 may be filled with any or all bins contained as below.
R1
R2
R3
810–1135
0R
-40 ~ +100°C
-40 ~ +85°C
5V
30 mA
100 mA
78 mW
260° C
125° C
-0.5 mA/°C
CONDITIONS
I_F = 20 mA
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
580–810
0Q
415–580
619
Forward Voltage (V_F)
Rank
G
623
626
Dominant Wavelength (nm)
H
0P _{Luminous intensity is}
631 ^{at 0P bin or above.}
J
6
Voltage
1.8–2.0
2.0–2.2
2.2–2.4
2.4–2.6
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
Beam Pattern
Issue A 10/05
Page 2 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com