OVLKBGT6 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Oval Blue LED Lamp (3mm)

Oval Blue LED Lamp (3mm)
OVLKBGT6
Absolute Maximum Ratings
T_A = 25^o C unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (10% Duty Cycle, 1KHz)
Power Dissipation
Lead Soldering Temperature (5 seconds max)
-40 ~ +100 °C
-30 ~ +80 °C
5V
30 mA
100 mA
120 mW
260° C
Electrical Characteristics
T_A = 25^o C unless otherwise noted
SYMBOL
PARAMETER
I_V
Luminous Intensity
V_F
Forward Voltage
I_R
Reverse Current
D
Dominant Wavelength
2½
50% Power Angle
MIN
TYP
MAX UNITS
220
300
----
mcd
----
3.4
3.9
V
----
----
2
µA
465
470
475
nm
x: 100
----
----
deg
y: 60
Standard Bins (I_F = 20mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVLKBGT6 may be filled with any or all bins contained as below.
CONDITIONS
I_F = 20 mA
I_F = 20 mA
V_R = 5V
I_F = 20 mA
I_F = 20 mA
320–380
5
265–320
4
220–265
3
465
470
475
Dominant Wavelength (nm)
Luminous intensity is
at 3 bin or above.
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. When soldering, leave 2.5mm minimum clearance between the resin base and the soldering point.
Issue 1.0 0505
Page 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com