OVLJRGD8 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Oval Red LED Lamp (4mm)

Oval Red LED Lamp (4mm)
OVLJRGD8
Absolute Maximum Ratings
T_A = 25^o C unless otherwise noted
Storage Temperature Range
-40 ~ +100 °C
Operating Temperature Range
-40 ~ +95 °C
Reverse Voltage
5V
Continuous Forward Current¹
50 mA
Peak Forward Current (10% Duty Cycle, 1KHz)
200 mA
Power Dissipation
125 mW
Lead Soldering Temperature (3mm from the base of the epoxy bulb)²
260°C
Notes:
1. For long term performance the drive currents between 10mA and 30mA are recommended. Please contact an Optek sales representative
for more information on recommended drive conditions.
2. Solder time less than 3 seconds at temperature extreme.
Electrical Characteristics
T_A = 25^o C unless otherwise noted
SYMBOL
PARAMETER
I_v
Luminous Intensity
V_F
Forward Voltage
I_R
Reverse Current
D
Dominant Wavelength
2 ½H-H
2 ½V-V
50% Power Angle
MIN
TYP
MAX UNITS
280
400
----
mcd
----
2.0
2.5
V
----
----
100
µA
620
624
628
nm
----
100
----
deg
----
50
----
deg
CONDITIONS
I_F = 20mA
I_F = 20mA
V_R = 5V
I_F = 20mA
I_F = 20mA
I_F = 20mA
Standard Bins (I_F = 20mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVLJRGD8 may be filled with any or all bins contained as below.
550
390
Q
280
620
Dominant Wavelength (nm)
P
628
Luminous intensity is
at P bin or above.
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000PPM.
Issue 1.0 0505
Page 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com