OVLJGGD8 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Oval Green LED Lamp (4mm)

Oval Green LED Lamp (4mm)
OVLJGGD8
Absolute Maximum Ratings
T_A = 25^o C unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (10% Duty Cycle, 1KHz)
Power Dissipation
Lead Soldering Temperature (3mm from the base of the epoxy bulb)¹
Note:
1. Solder time less than 3 seconds at temperature extreme.
Electrical Characteristics
T_A = 25^o C unless otherwise noted
SYMBOL
PARAMETER
I_v
Luminous Intensity
V_F
Forward Voltage
I_R
Reverse Current
D
Dominant Wavelength
2 ½H-H
2 ½V-V
50% Power Angle
MIN
TYP
770
1200
----
3.6
----
----
520
525
----
100
----
50
MAX
----
4.2
100
535
----
----
UNITS
mcd
V
µA
nm
deg
deg
-40 ~ +100 °C
-40 ~ +95 °C
5V
25 mA
100 mA
105 mW
260°C
CONDITIONS
I_F = 20mA
I_F = 20mA
V_R = 5V
I_F = 20mA
I_F = 20mA
I_F = 20mA
Standard Bins (I_F = 20mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVLJGGD8 may be filled with any or all bins contained as below.
2130
1520
1100
770
520
X7
X8
X9
U
T
S
525
530
535
Dominant Wavelength (nm)
Luminous intensity is
at S bin or above.
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000PPM.
Issue 1.0 0505
Page 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com