English
Language : 

OVLHQKD8 Datasheet, PDF (2/3 Pages) OPTEK Technologies – Oval Orange LED Lamp(5 mm)
Oval Orange LED Lamp (5 mm)
OVLHQKD8
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range
-40 ~ +100°C
Operating Temperature Range
-40 ~ +95° C
Reverse Voltage
Continuous Forward Current2
5V
50 mA
Peak Forward Current (10% Duty Cycle, 1KHz)
200 mA
Power Dissipation
130 mW
Lead Soldering Temperature (3mm from the base of the epoxy bulb)1
260° C
Note:
1. Solder time less than 3 seconds at temperature extreme.
2. For long-term performance, the drive currents between 10mA and 30mA are recommended. Please contact an OPTEK sales
representative for more information on recommended drive conditions.
Electrical Characteristics
TA = 25o C unless otherwise noted
SYMBOL
PARAMETER
Iv
Luminous Intensity
VF
Forward Voltage
IR
Reverse Current
D
Dominant Wavelength
2 ½H-H
2 ½V-V
50% Power Angle
MIN
TYP
MAX UNITS
550
800
----
mcd
----
2.3
2.6
V
----
----
100
µA
612
618
625
nm
----
110
----
deg
----
50
----
deg
CONDITIONS
IF = 20 mA
IF = 20 mA
VR = 5 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
Standard Bins (IF = 20mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown.
Orders for OVLHQKD8 may be filled with any or all bins contained as below.
1100–1520
770–1100
550–770
612
Dominant Wavelength (nm)
T
S
R Luminous intensity is
at R bin or above.
625
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
Issue A 12/05
Page 2 of 3
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com