OVLHGKD8 Datasheet, PDF (2/3 Pages) OPTEK Technologies – Oval Green LED Lamp(5 mm)

Oval Green LED Lamp (5 mm)
OVLHGKD8
Absolute Maximum Ratings
T_A = 25^o C unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (10% Duty Cycle, 1KHz)
Power Dissipation
Lead Soldering Temperature (3mm from the base of the epoxy bulb)¹
Note:
1. Solder time less than 3 seconds at temperature extreme.
Electrical Characteristics
T_A = 25^o C unless otherwise noted
SYMBOL
PARAMETER
I_v
Luminous Intensity
V_F
Forward Voltage
I_R
Reverse Current
D
Dominant Wavelength
2 ½H-H
2 ½V-V
50% Power Angle
MIN
TYP
MAX UNITS
770
1100
----
mcd
----
3.6
4.2
V
----
----
100
µA
520
525
535
nm
----
110
----
deg
----
50
----
deg
Standard Bins (I_F = 20mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVLHGKD8 may be filled with any or all bins contained as below.
-40 ~ +100°C
-40 ~ +95° C
5V
25 mA
100 mA
105 mW
260° C
CONDITIONS
I_F = 20 mA
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
1520–2130
1100–1520
770–1100
520
525
530
Dominant Wavelength (nm)
U
T
S _{Luminous intensity is}
at S bin or above.
535
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
Issue A 12/05
Page 2 of 3
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com