OVLFY3C7 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Round Yellow Through-hole LED Lamp (5 mm)

Round Yellow Through-hole LED (5 mm)
OVLFY3C7
Absolute Maximum Ratings
T_A = 25^oC unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current²
Peak Forward Current (10% Duty Cycle, 1KHz)
Power Dissipation
Lead Soldering Temperature (3mm from the base of the epoxy bulb)¹
Current Linearity vs. Ambient Temperature
LED Junction Temperature
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. Design of Heat Dissipation should be considered.
Electrical Characteristics
T_A = 25^oC unless otherwise noted
SYMBOL
PARAMETER
I_v
Luminous Intensity
V_F
Forward Voltage
I_R
Reverse Current
P
Peak Wavelength
D
Dominant Wavelength
Spectra Half Width
2½
50% Power Angle
MIN
3115
----
----
----
----
----
----
TYP
5700
2.2
----
593
589
25
30
MAX
----
2.6
10
----
----
----
----
UNITS
mcd
V
µA
nm
nm
nm
deg
Standard Bins (I_F = 20mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVLFY3C7 may be filled with any or all bins contained as below.
-40 ~ +100°C
-40 ~ +85°C
5V
30 mA
100 mA
78 mW
260° C
-0.5 mA/°C
125° C
CONDITIONS
I_F = 20 mA
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
6105–8550
4360–6105
3115–4360
585
589
592
Dominant Wavelength (nm)
X
W
V _{Luminous intensity is}
595 ^{at V bin or above.}
Forward Voltage (V_F)
Rank
Voltage
G
1.8–2.0
H
2.0–2.2
J
2.2–2.4
6
2.4–2.6
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM..
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 10/05
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com