OVLFB3C7 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Round Blue Through-hole LED Lamp (5 mm)

Round Blue Through-hole LED (5 mm)
OVLFB3C7
Absolute Maximum Ratings
T_A = 25^oC unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current²
Peak Forward Current (10% Duty Cycle, 1KHz)
Power Dissipation
Lead Soldering Temperature (3mm from the base of the epoxy bulb)¹
Current Linearity vs. Ambient Temperature
LED Junction Temperature
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. Design of Heat Dissipation should be considered.
Electrical Characteristics
T_A = 25^oC unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
I_v
Luminous Intensity
810
1350
----
mcd
V_F
Forward Voltage
----
3.4
4.0
V
I_R
Reverse Current
----
----
50
µA
P
Peak Wavelength
----
466
----
nm
D
Dominant Wavelength
----
470
----
nm
Spectra Half Width
----
25
----
nm
2½
50% Power Angle
----
30
----
deg
Standard Bins (I_F = 20mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVLFB3C7 may be filled with any or all bins contained as below.
-40 ~ +100°C
-40 ~ +85°C
5V
20 mA
50 mA
100 mW
260° C
-0.2 mA/°C
125° C
CONDITIONS
I_F = 20 mA
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
1590–2225
T
1135–1590
S
810–1135
R _{Luminous intensity is}
at R bin or above.
Dominant Wavelength (470 nm)
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 10/05
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com