English
Language : 

OVLEW1CB9 Datasheet, PDF (2/5 Pages) OPTEK Technologies – White High-Intensity LED Lamp White High-Intensity LED Lamp
White High-Intensity LED Lamp
OVLEW1CB9
Absolute Maximum Ratings
TA = 25o C (on metal core PCB1) unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (10% Duty Cycle, 1KHz)
Power Dissipation
Lead Soldering Temperature (3mm from the base of the epoxy bulb)1
Electrostatic Discharge
Note:
1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics
TA = 25o C (on metal core PCB1) unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX UNITS
IV
VF
IR
2½
Luminous Intensity
Forward Voltage
Reverse Current
50% Power Angle
7150
9000
----
mcd
----
3.5
4.0
V
----
----
50
µA
----
15
----
deg
x
----
0.29
----
----
Chromaticity Coordinates
y
----
0.28
----
----
Standard Bins (IF = 20mA)
Lamps are sorted to luminous flux ( V) and chromaticity coordinates (x, y) bins shown.
Orders for OVLEW1CB9 may be filled with any or all bins contained as below.
-40 ~ +100 °C
-40 ~ +85 °C
5V
25 mA
100 mA
100 mW
260 ± 5°C
150 V
CONDITIONS
IF = 20 mA
IF = 20 mA
VR = 5 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
A1
A2
B1
B2
C1
C2
D1
D2
14250-18000
L1
11250-14250
K2
9000-11250
K1
7150-9000
J2
Chromaticity Coordinates (x, y)
Luminous Intensity is
at J2 bin or above.
Rank
A1
A2
B1
B2
C1
C2
D1
D2
Chromaticity x 0.215–0.245 0.245–0.260 0.260–0.275 0.275–0.290 0.290–0.305 0.305–0.320 0.320–0.340 0.340–0.360
Coordinates y 0.155–0.215 0.185–0.245 0.215–0.275 0.245–0.295 0.275–0.315 0.295–0.335 0.315–0.355 0.335–0.385
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. Pb content <1000 PPM.
3. To designate luminous intensity ranks, please contact OPTEK.
Issue A 10/05
Page 2 of 5
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com