OVLAG6CB8 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Round Green LED Lamp (3mm)

Round Green LED Lamp (3mm)
OVLAG6CB8
Absolute Maximum Ratings
T_A = 25^oC unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (10% Duty Cycle, 1KHz)
Power Dissipation
Lead Soldering Temperature (3mm from the base of the epoxy bulb)¹
Note:
1. Solder time less than 3 seconds at temperature extreme.
Electrical Characteristics
T_A = 25^oC unless otherwise noted
SYMBOL
PARAMETER
I_v
Luminous Intensity
V_F
Forward Voltage
V_F
Forward Voltage
I_R
D
2 ½H-H
Reverse Current
Dominant Wavelength
50% Power Angle
MIN
1100
----
1.7
----
520
----
TYP
2000
3.6
----
----
527
65
MAX
----
4.2
2.5
100
535
----
UNITS
mcd
V
V
µA
nm
deg
-40 ~ +100 °C
-40 ~ +95 °C
5V
25 mA
100 mA
105 mW
260°C
CONDITIONS
I_F = 20mA
I_F = 20mA
I_F = 1.0µA
V_R = 5V
I_F = 20mA
I_F = 20mA
Standard Bins (I_F = 20mA)
Lamps are sorted to luminous intensity (I_V) and dominant wavelength ( _D) bins shown.
Orders for OVLAG6CB8 may be filled with any or all bins contained as below.
X7
3000
X8
X9
2130
1520
1100
520
525
530
Dominant Wavelength (nm)
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000PPM.
V
U
T _{Luminous intensity is}
at T bin or above.
535
Issue 1.0 0605
Page 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com