OVFSW6C8 Datasheet, PDF (2/6 Pages) OPTEK Technologies – 4-Pin White LED Lamp (7.6mm)

4-Pin White LED Lamp (7.6mm)
OVFSW6C8
Absolute Maximum Ratings
T_A = 25^o C unless otherwise noted
Storage Temperature Range
-30 ~ +80°C
Operating Temperature Range
Lead Soldering Temperature (3mm from the base of the epoxy bulb)¹
-20 ~ +75°C
260°C
Reverse Voltage
5V
Continuous Forward Current
Peak Forward Current (10% Duty Cycle, PW ”  —VHF
Power Dissipation
Note:
1. Solder time less than 3 seconds at temperature extreme.
Electrical Characteristics
T_A = 25^o C unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX UNITS
30 mA
100 mA
140 mW
CONDITIONS
I_V
Luminous Intensity
770
1200
----
mcd
I_F = 30mA
V_F
Forward Voltage
----
4.0
4.6
V
I_F = 30mA
I_R
Reverse Current
----
----
100
µA
V_R = 5V
x
----
0.31
----
----
Chromaticity Coordinates
y
----
0.32
----
----
I_F = 30mA
I_F = 30mA
2½
50% Power Angle
----
60
----
deg
I_F = 30mA
Standard Bins (I_F = 30mA)
Lamps are sorted to luminous intensity (I_V), forward voltage (V_F), and dominant wavelength ( _D) bins shown.
Orders for OVFSW6C8 may be filled with any or all bins contained as below.
1520-2130
1100-1520
770-1100
A
B1
B2
C
Dominant Wavelength (nm)
U
T
S _{Luminous intensity is}
at S bin or above.
Rank
A
B1
B2
C
Chromaticity ^{x 0.280 0.264 0.283 0.296 0.287 0.283 0.330 0.330 0.296 0.287 0.330 0.330 0.330 0.330 0.361 0.356}
Coordinates _{y 0.248 0.267 0.305 0.276 0.295 0.305 0.360 0.339 0.276 0.295 0.339 0.318 0.318 0.360 0.385 0.351}
Forward Voltage (V_F)
Rank
V10
Voltage (V)
3.4–3.6
V11
3.6–3.8
V12
3.8–4.0
V13
4.0–4.2
V14
4.2–4.4
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
V15
4.4–4.6
Issue 1.0 0505
Page 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com