OUE8A Datasheet, PDF (2/8 Pages) OPTEK Technologies – Ultraviolet (UV) Metal Can LED

Ultraviolet (UV) Metal Can LED
OUE8A Series
Absolute Maximum Ratings (T_A=25°C unless otherwise noted)
Storage Temperature Range
Operating Temperature Range
-40^o C to +125^o C
-40^o C to +85^o C
Allowable Reverse Current (I_R)
Continuous Forward Current
85 mA
100 mA
Peak Pulsed Forward Current (Pulse Width 100 usec @ 10% duty cycle)
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
1.6 A
260° C⁽¹⁾
Power Dissipation
Notes:
1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when wave soldering.
370 mW
Electrical & Optical Characteristics (T_A = 25°C unless otherwise noted)
SYMBO
L
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
V_F
ΔV_F/ΔT
∆λ_P
∆λ_P /∆T
ΔP_o/ΔT
θ_HP
Forward Voltage
V_F Temperature Co-efficient
Spectral Half Width
Peak Spectral Shift with Temperature
Power Output Drop Temperature Co-efficient
Emission Angle at Half Power Points
3.0 3.3 3.7
V
-4.8
mV/^oC
-
12
-
nm
- 0.035 -
- -0.2 -
nm/°C
%/^oC
-
18
- Degree
I_F = 100 mA
I_F = 20 mA
[13.20]
0.520
Pin 2
Part Number
Date Code
Pin 1
Pin 2
Pin 1
Cathode
Anode
Dimensions are in inches [ mm]
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2 07/09
Page 2 of 8
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com