OP602TX_14 Datasheet, PDF (2/2 Pages) OPTEK Technologies – OP602TX_14

High Reliability NPN Silicon Phototransistor
OP602, OP603, OP604 (TX, TXV)
OP604 (S)
Absolute Maximum Ratings (T_A=25°C unless otherwise noted)
Storage Temperature Range
-65° C to +150° C
Operating Temperature Range
Collector-Emitter Voltage
Emitter-Collector Voltage
Soldering Temperature (5 seconds with soldering iron)⁽¹⁾
Power Dissipation⁽²⁾
-55° C to +125° C
50 V
7.0 V
260° C
50 mW
Electrical Characteristics (T_A = 25°C unless otherwise noted)
Input Diode
SYMBOL
PARAMETER
I_{C (ON)}
On-State Collector Current
OP602TX, OP602TXV
OP603TX, OP603TXV
OP604TX, OP604TXV, OP604S
I_CEO Collector Dark Current
V_(BR)CEO
V_(BR)ECO
V_CE(SAT)
t_f
t_r
Collector-Emitter Breakdown Voltage
Emitter-Collector Breakdown Voltage
Collector-Emitter Saturation Voltage
Rise Time
Fall Time
MIN TYP MAX UNITS
TEST CONDITIONS
2
4
-
5
8
mA V_CE = 5.0 V, E_E = 20 mW/cm^2(3)(4)
7
-
-
-
25
nA V_CE = 10.0 V, E_E = 0
-
-
100
µA V_CE = 30.0 V, E_E = 0 T_A = 100° C
50
-
-
V I_C= 100 µA, E_E = 0
7
-
-
V I_C= 100 µA, E_E = 0
-
- 0.4
V
I_C = 0.4 mA, E_E = 20 mW/cm^(2)(3)(4)
-
-
-
-
20
20
µs
V_CC = 30 V, I_C = 1.00 mA,
RL = 100 Ω^(2)(3)(4)
Notes:
(1) Refer to Application Bulleting 202, which discusses proper techniques for soldering pill-type devices to PCBoards.
(2) No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when wave soldering.
(3) Derate linearly 0.5 mW/° C above 25° C.
(4) Junction temperature maintained at 25° C.
(5) Light source is an unfiltered tungsten lamp operating at CT=2870 K or equivalent source.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 08/2010
Page 2 of 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.OPTEKinc.com