OP223_06 Datasheet, PDF (2/3 Pages) OPTEK Technologies – Hi-Reliability GaAIAs Infrared Emitting Diode

Hi-Reliability GaAIAs Infrared Emitting Diode
OP223, OP224 (TX, TXV)
OP224 (S)
Absolute Maximum Ratings (T_A = 25° C unless otherwise noted)
Storage Temperature Range
Operating Temperature Range
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]⁽¹⁾
Reverse Voltage
Continuous Forward Current
Power Dissipation⁽²⁾
-65^o C to +150^o C
-55^o C to +125^o C
260° C
2.0 V
100 mA
100 mW
Notes:
1. No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
2. Derate linearly 1.00 mW/° C above 25° C.
Electrical Characteristics (T_A = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
E_{E (APT)}
V_F
I_R
λ_P
B
Radiant Power Output
OP223 (TX, TXV)
OP224 (S, TX, TXV)
Forward Voltage
Reverse Current
Wavelength at Peak Emission
Spectral Bandwidth between Half Power
Points
1.00 -
-
1.50 -
-
0.80 - 1.80
-
- 100
- 890 -
-
80
-
mW I_F = 50 mA
I_F = 50 mA
V I_F = 50 mA
µA V_R= 2.0 V
nm I_F = 50 mA
nm I_F = 50 mA
∆λ_P /∆T Spectral Shift with Temperature
θ_HP Emission Angle at Half Power Points
- 0.18 - nm/°C I_F = Constant
-
18
- Degree I_F = 50 mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2 07/06
Page 2 of 3
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com