OP205CL_14 Datasheet, PDF (2/2 Pages) OPTEK Technologies – Infrared Light Emitting Diode

Infrared Light Emitting Diode
OP205CL
Absolute Maximum Ratings T_A = 25^o C unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Lead Soldering Temperature
Reverse Voltage
Continuous Forward Current
Power Dissipation
Electrical Characteristics (T_A = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP
P_O
Radiant Intensity
8.5 12.0
V_F
Forward Voltage
-
-
I_R
Reverse Current
-
-
λ_P
Peak Emission Wavelength
-
875
Θ_HP
Total Emission Angle at Half Power Points
-
6
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. De-rate linearly at 2.17 mW/° C above 25° C.
3. Total Optical Power (P_O) is measured by OPTEK Technology equipment.
-40° C to +125° C
-40° C to +100° C
260° C⁽¹⁾
3.0 V
50 mA
160 mW⁽²⁾
MAX
-
2.0
10
-
10
UNITS
CONDITIONS
mW
I_F = 50mA⁽³⁾
V
µA
nm
Deg.
I_F = 50mA
V_R = 3.0V
I_F = 20mA
I_F = 20mA
Relative Radiant Intensity vs.
Forward Current vs. Temperature
350%
Normalized at IF = 20mA,
TA = 20°C. Temperatures
stepped in 20°C Increments
300%
-40°C
250%
200%
150%
100%
100°C
50%
0%
0
10
20
30
40
50
Forward Current (mA)
Forward Voltage vs. Forward
Current vs. Temperature
1.6
Temperatures stepped in 20°C
Increments
-40°C
1.5
1.4
100°C
1.3
1.2
1.1
0
10
20
30
40
50
Forward Current (mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 10/06
Page 2 of 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com