OPV382 Datasheet, PDF (1/2 Pages) OPTEK Technologies – Vertical Cavity Surface Emitting Laser in Lateral Package

Vertical Cavity Surface Emitting
Laser in Lateral Package
OPV382
• 850nm VCSEL technology
• High thermal stability
• Low drive current
• High output power
• Narrow Beam Angle
The OPV382 is a Vertical Cavity Surface Emitting Laser (VCSEL) packaged in a dome lens lateral package.
VCSELs offer many advantages in sensing applications when compared to infrared LEDs. These devices require
substantially lower drive currents to obtain the same amount of output power as LEDs. This feature allows
VCSELs to be used in low power consumption applications such as battery operated equipment.
The dome lens packaging creates a narrow beam angle from the device. Long distance applications may benefit
from this feature as secondary optics may be eliminated, reducing total system cost. The OPV382 is optically and
spectrally compatible with Optek’s standard detector products such as the OP500 series phototransistors, OP530
series photodarlingtons and the OP900 series photodiodes.
Applications
• Non-contact position sensing
• Photoelectric sensors
• Optical encoders
• Light curtains
Emission
Surface
OPV382
Pin Connection
1
Cathode
2
Anode
VCSEL
1
2
Additional laser safety information can be
found on the Optek website. See application
bulletin #221.
Classification is not marked on the device
due to space limitations. See package out-
line for centerline of optical radiance. Oper-
ating devices beyond maximum rating may
result in hazardous radiation exposure.
Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] FAX: (972) 323– 2396 [e-mail] www.optekinc.com
Pb
LEAD FREE
A subsidiary of
TT electronics plc