English
Language : 

OPV315_14 Datasheet, PDF (1/3 Pages) OPTEK Technologies – Vertical Cavity Surface Emitting Laser in ST Optical Sub-Assembly
Vertical Cavity Surface Emitting Laser in ST
Optical Sub-Assembly
OPV315AT, OPV315BT, OPV315YAT, OPV315YBT
Features:
• 850 nm VCSEL technology
• High thermal stability
• Up to 2.5 Gbps
• Recommended for multimode fiber applications
• Microbead lens
• Pin out and attenuation options available on request
• Burned in for communication level reliability
• High optical coupling to MM fiber
• ST* style receptacle
Description:
The OPV315AT and OPV315BT are high performance 850nm VCSEL packaged for high speed communication
links. OPV315AT and OPV315BT combines all the performance advantages of a VCSEL with the addition of a
power monitor diode for precise control of optical power.
The OPV315YAT and OPV315YBT are identical electrically and optically and differ only in pin out. Refer to
mechanical drawings for details.
This product’s combination of features including high speed, high output power and concentric beam makes it an
ideal transmitter for integration into all types of data communications equipment.
Applications:
• Fibre Channel
• Gigabit Ethernet
• ATM
• VSR (Very Short Reach)
• Intra-system links
• Optical backplane interconnects
* - ST is a registered trademark of AT&T
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage Temperature
-40° C to +125° C
Operating Temperature
0° C to +85° C
Soldering Lead Temperature
260° C for 10 Seconds
Maximum Forward Peak Current, Continuous
12 mA
Maximum Reverse Voltage
5V
Maximum Forward Current, pulsed (1µs P.W., 10% D.C.)
48mA
Additional laser safety information can be found on
the Optek website. See application #221.
Classification is not marked on the device due to
space limitations. See package outline for center-
line of optical radiance. Operating devices beyond
maximum rating may cause devices to exceed rated
classification
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue 3 05/2011
Page 1 of 3