OPV214T Datasheet, PDF (1/4 Pages) OPTEK Technologies – Vertical Cavity Surface Emitting Laser in ST Optical Sub-Assembly

Vertical Cavity Surface
Emitting Laser in ST
Optical Sub-Assembly
Features
• 850 nm VCSEL technology
• High thermal stability
• Up to 1.25 Gbps
• Recommended for multimode fiber applications
• Microbead lens
• Pin out and attenuation options available on
request
• Burned in for communication level reliability
• High optical coupling to MM fiber
• ST* style receptacle
Description
The OPV214AT and OPV214BT are high performance
850nm VCSEL packaged for high speed communication
links. OPV214AT and OPV214BT combines all the per-
formance advantages of a VCSEL with the addition of a
power monitor diode for precise control of optical power.
The OPV214YAT and OPV214YBT are identical electri-
cally and optically and differ only in pin out. Refer to me-
chanical drawings for details.
This product’s combination of features including high
speed, high output power and concentric beam make it
an ideal transmitter for integration into all types of data
communications equipment.
Applications include:
♦ Fibre Channel
♦ Gigabit Ethernet
♦ ATM
♦ VSR (Very Short Reach)
♦ Intra-system links
♦ Optical backplane interconnects.
Absolute Maximum Ratings (T_A = 25°C unless otherwise noted)
Storage Temperature
-40° C to +125° C
Operating Temperature
-40° C to +85° C
Soldering Lead Temperature
260° C for 10 Seconds
Maximum Forward Peak Current
30 mA
Maximum Reverse Voltage
5V
This product is classified as 1M per
EN/IEC60825-1/A2:2001. The output
from class 1M products must not be
viewed directly using optical magnifiers
within a distance of 100mm (4 inches).
Additional laser safety information can
be found on the Optek website. See
application bulletin #221.
* - ST is a registered trademark of AT&T
Optek Technology, Inc.
Carrollton, Texas 75006
[phone]
Page 1 of 4
[e-mail]
June 2003
Issue 2.0
www.optekinc.com