English
Language : 

OPI1280 Datasheet, PDF (1/2 Pages) OPTEK Technologies – Fiber Optic Isolator-Phototransistor Sensor
Fiber Optic Isolator—Phototransistor Sensor
OPI1280 Series
Features:
• Opaque plastic housings
• High noise immunity
• Visible Red LED with Phototranisitor Output
• 0.05” (1.27 mm) lead spacing
• Data Transfer through plastic fiber optic cable
• Isolation voltage 15 KV (OPI1280-032), Longer versions higher
Description:
Each OPI1280 consists of a visible Red LED and a Phototransistor sensor, which are housed in separate opaque molded
plastic housings and coupled by plastic fiber optic cable. The heavy-duty opaque housing shields the optical signal from dust,
making this series of devices ideal for dust contaminated environments.
The OPI1280 series are designed for applications that require high voltage isolation between input and output or signal
communication over short distances. Depending on the length of the fiber optic cable, the emitter does not have to be optically
in-line with the sensor. The isolation voltage is greater than 10 K volts per inch (Isolation distance between components) for all
versions of the OPI1280.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more
information.
Applications:
• Requiring High Voltage isolation between input
and output
• Electrical isolation in dirty environments
• Industrial equipment
• Medical equipment
Part
Number
OPI1280-018
OPI1280-026
OPI1280-032
OPI1280-040
OPI1280-066
OPI1280-080
Ordering Information
Isolation
Distance
Device
Length
LED Peak Lead
Wavelength Length
0.71” [18 mm] 1.26” [32.0 mm]
1.02” [26 mm] 1.57” [40.0 mm]
1.26” [32 mm] 1.80” [45.8 mm]
1.57” [40 mm] 2.12” [53.8 mm]
645 nm
0.45”
[11.4 mm]
2.60” [66 mm] 3.15” [80.0 mm]
3.15” [80 mm] 3.69” [93.8 mm]
1
3
2
4
Pin # LED Pin #
1 Anode
3
2 Cathode 4
Transistor
Emitter
Collector
Device
Length
-
[9.0]
-.355
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.2 08/07
Page 1 of 2