OPF522 Datasheet, PDF (1/3 Pages) OPTEK Technologies – 5 MBd Fi ber Op tic Re ceiver

Product Bulletin OPF522
February 1996
5 MBd Fiber Optic Receiver
Type OPF522
VCC
GND
OUTPUT
Features
• Component pre-mounted and ready to
use
• Pre-tested with fiber to assure
performance
• Popular style receptacle
• Optimized for fiber optic applications
using 50 to 200 micron fiber
Description
The OPF522 contains a monolithic
photo-IC comprised of a photodetector
and DC amplifier driving an open
collector output Schottky transistor. The
output makes the OPF522 compatible
with TTL and CMOS logic.
Absolute Maximum Ratings (T_A = 25^o C unless otherwise noted)
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55^o C to +115^o C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40^o C to +85^o C
Lead Soldering Temperature (for 10 sec.). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260^o C
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 7.0 V
Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA
Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 18.0 V
Open Collector Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mW
Fan Out (TTL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5⁽¹⁾
The receiver is designed to operate from
a single +5V supply. It is essential that a
bypass capacitor be connected from V_CC
to Common of the receiver.
This component is susceptible to damage from electrostatic discharge (ESD). Normal
static precautions should be taken in handling and assembly of this component to
prevent ESD damage or degradation.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
8-100
[phone]
Fax [phone]