OPF520_14 Datasheet, PDF (1/9 Pages) OPTEK Technologies – Fiber Optic Receiver

Fiber Optic Receiver
OPF520 Series
OPF520 Series
• Low Cost plastic cap package
• Designed to self align in the bore of standard fiber optic
receptacles
• Press fit simplifies installation
• Optimized for fiber optic applications using 50 to 200 mi-
cron fiber
The OPF520 series fiber optic receiver is a high performance device packaged for data communications links. As such, it is
designed to work with fiber core diameters from 50µm to 200µm and over a broad input power range. The construction con-
tains a monolithic photo-IC comprised of a photodiode, biasing network, DC amplifier and an open collector output transistor.
The output circuitry makes this device compatible with TTL and CMOS logic.
This receiver is designed to operate from a single 5V supply. It is essential that a bypass capacitor be connected from V_CC to
GND in order to ensure the best possible operation.
Applications
♦ Industrial Ethernet equipment
♦ Copper-to-fiber media conversion
♦ Intra-system fiber optic links
♦ Video surveillance systems
Part Ordering Information
Part Number Description
OPF520
Plastic Cap Component
OPF522
Metal ST Receptacle
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] FAX: (972) 323– 2396 [e-mail] www.optekinc.com
Issue C 05/2013
Page 1 of 9