OPF500_14 Datasheet, PDF (1/5 Pages) OPTEK Technologies – Fiber Optic Receiver

Fiber Optic Receiver
OPF500 Series
OPF500 Series
• Interfaces with all logic circuits
• Two output options
• Optimized for fiber optic applications using 50 to 200 mi-
cron fibers
• Data rate to 200kbps NRZ
• Available with multiple packaging options
The OPF500 series receiver contains a monolithic integrated circuit which incorporates a photodiode, linear ampli-
fier, a voltage regulator, and a Schmitt trigger on a single silicon chip. These receivers are designed for short haul
fiber optic systems using 850 nm LEDs such as Optek’s OPF300 series.
These devices feature TTL/LSTTL compatible logic level output. An internal voltage regulator allows operation
with supply voltages ranging from 4.5V to 16V.
Applications
♦ Industrial Ethernet equipment
♦ Copper-to-fiber media conversion
♦ Intra-system fiber optic links
♦ Video surveillance systems
Part Ordering Information
Part Number Description
OPF500
Buffer, 10kW Pull-Up
Plastic Cap Component
OPF505
Buffer, 10kW Pull-Up
Metal Can Component
OPF507
Buffer, 10kW Pull-Up
Metal ST Receptacle
OPF510
Inverter, 10kW Pull-Up
Plastic Cap Component
OPF512
Inverter, 10kW Pull-Up
Metal ST Receptacle
This component is susceptible to dam-
age from electrostatic discharge (ESD).
Normal static precautions should be
taken in handling and assembly of this
component to prevent ESD damage or
degradation.
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] FAX: (972) 323– 2396 [e-mail] www.optekinc.com
Issue A 05/2013
Page 1 of 5