OPB856Z Datasheet, PDF (1/3 Pages) OPTEK Technologies – Wide Gap Optical Sensor

Wide Gap Optical Sensor
OPB856Z
Features:
• Designed for Industrial applications
• Threaded housing (M12 X 1 TH), Nut included
• Molded connectors mates with Molex 03-06-2023 plug.
• Emitter (White) and Senor (Black) housing color coded
Product Photo Here
Description:
The OPB856 emitter and sensor pair that consists of an LED (935 nm) and a Phototransistor designed to operate
efficiently with each other. They are mounted in a threaded (M12x1TH) color-coded housing. The LED (white)
and the Phototransistor (black) are designed to easily panel mount in through a 0.4724” (12.0 mm) hole. A 12 mm
nut is included for each housing. Both components is designed to electrically mate with a Molex (03-06-2023)
connector.
The OPB856 pair are designed to operate with separation distances between the LED and Phototransistor up to
12” (30.48 cm).
For Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK
for more information.
Applications:
• Non-contact interruptive object sensing
• Assembly line automation
• Machine automation
• Equipment security
• Machine safety
Optical Pair
Part Number
OPB856Z
Ordering Information
LED Peak
Wavelength
Sensor
935 nm
Transistor
Connector Type
Use Molex 03-06-2023
1
1
LED
Phototransistor
2
2
Housing
LED - White
Plug
MOLEX 03-06-2023
Pin for Plug
Male
MOLEX 02-06-6122
Sensor - Black
MOLEX 03-06-2023
Female
MOLEX 02-06-7104
White Housing
Pin #
LED
1
Anode
2
Cathode
Black Housing
Pin # Phototransistor
1
Emitter
2
Collector
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A .1 01/06
Page 1 of 3