OPB816 Datasheet, PDF (1/2 Pages) OPTEK Technologies – Slotted Op tical Switch

Product Bulletin OPB816
November 2000
Slotted Optical Switch
Type OPB816
[1.02]
4X R .125
[3.18]
2X .125
NOTE 6
[30.73]
1.21
[24.38]
.96
[2.54]
.10
[3.18]
2X R .125
[12.19]
.48
WIRE COLOR
WHITE
GREEN
RED
BLACK
IDENTITY
COLLECTOR
EMITTER
ANODE
CATHODE
Features
• .20”(5.08 mm) wide gap
• 24”minimum, 26 AWG wire leads .86”
(21.8 mm) deep slot
•Dust protection
[4.95]
.195
OPTICAL CL
[3.81]
.15
[14.99 ± 0.38]
.590 ± .015
[5.08]
.20
[6.48]
.255
[3.18]
.125
[16.51]
.650 REF
[19.30]
.760
[609.6]
24.0 MIN
[1.4 ± 0.51]
.055 ± .02
WIRE: 26 AWG, 7 STRAND
PVC INSUL., UL RATED
Description
The OPB816 consists of an infrared
emitting diode and an NPN silicon
phototransistor mounted in an opaque
housing with clear windows for dust
protection. The deep slot allows for a
longer reach of the optical center line
from the mounting plane, .650”
(16.51 mm).
Internal apertures are .010”x 0.06”for
the phototransistor “S side”and .050”x
.06”for the LED “E side”.
Custom electrical, wire or cabling is
available. Contact your local
representative or Optek for more
information.
[ 8.89 ± 0.51]
.35 ± .02
[ 7.62 ]
.30 REF
[ 8.13 ± 0.51]
.32 ± .02
TOLERANCE ± .010 [0.25]
DIMENSIONS ARE IN INCHES [MILLIMETERS]
Absolute Maximum Ratings (T_A = 25^o C unless otherwise noted)
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . . -40°C to +80°C
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Reverse DC Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW⁽¹⁾
Output Phototransistor
Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emitter-Collector Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW⁽¹⁾
Visit our website at www.optekinc.com
or email us at [e-mail]
NOTES:
(1) Derate linearly 1.67 mW/°C above 25°C.
(2) All parameters tested using pulse technique.
(3) Clear dust protection.
PRECAUTIONS: Exposure of the plastic body to chlorinated hydrocarbons and ketones such as
thread lock and instant adhesive products will degrade the plastic body. Cleaning agents
methanol and isopropanol are recommended. Spray or wipe do not submerge.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
27
[phone]
Fax [phone]