OPB755N Datasheet, PDF (1/2 Pages) OPTEK Technologies – Reflective Object Sensor

Product Bulletin OPB755N
J_Ju_ann_ue_a1_ry9₂9₀6₀₆
Reflective Object Sensor
Type OPB755N
Features
• High contrast ratio 1000 to 1 minimum
• 12.0" ± 0.5" min. UL#1429 26 AWG
wire leads terminated into an AMP
#640442-5 connector
• Low cost plastic housing
12.0 ± 0.5
(304.8 ± 12.7)
Description
The OPB755N reflective assembly
features a phototransistor output
designed to decrease low-level light gain
while not affecting the high-level light
gain. Available with two mounting tabs as
OPB755T.
Available with PC Board mountable
leads as OPB750 series. Photologic^®
output sensors available in
OPB760/OPB770 series.
Absolute Maximum Ratings (T_A = 25^o C unless otherwise noted)
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . -40^o C to +80^o C
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Reverse DC Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
Output Phototransistor
Collector-Emitter Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
Notes:
(1) Derate Linearly 1.82 mW/^o C above 25^o C.
(2) All parameters tested using pulse technique.
(3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in
chlorinated hydrocarbons and ketones.
(4) Photocurrent is measured using an Eastman Kodak Neutral White test card having a 90%
diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog #1257795.
(5) IC(OFF) is the photocurrent measured with current to the input diode and a 5% reflecting
surface.
For RoHS compliant devices add "Z" to the end of the part number: OPB755NZ
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
11-46
[phone]
Fax [phone]