English
Language : 

OPB725 Datasheet, PDF (1/3 Pages) OPTEK Technologies – Long Distance Reflective Switch
Long Distance Reflective Switch
OPB725
Features:
• Remote mounting in 18 mm hole
• 48” (122 cm) 26 AWG wired with mounting nuts
• Non-contact infrared switch
• Up to 24” or more reflective distance depending on object
Description:
OPB725 uses an Infrared LED and Photologic® sensor in a reflective switch configuration. The assembly is
offered with a standard wire length of 48” [122 cm], and uses an opaque housing to reduce the sensor’s ambient
light sensitivity. The emitter and sensor are protected by a window clear to near infrared wavelengths, providing a
device that can operate in a dusty environment. The Photologic® sensor has an NPN Open-Collector output
providing the user a device that can be used in a variety of applications.
While an object is in the reflective path of the device, light from the LED will be reflected back to the housing
irradiating the surface of the Photologic® sensor causing the output NPN transistor to turn “ON” to provide a “low”
voltage output when connected to appropriate value pull-up resistor. When the Infrared light from the LED is not
being reflected to the Photologic sensor, the output transistor turns “OFF,” minimizing the IC(ON) current, providing a
“High” output.
Custom electrical, cabling and connectors are available. Contact your local representative or OPTEK for more
information.
Applications:
• Non-contact reflective object sensor
• Assembly line automation
• Machine automation
• Equipment security
• Door sensor
• Machine safety
• End of travel sensor
Part
Number
OPB725A-18Z
Ordering Information
LED Peak
Wavelength
Wire Length / Size
850 nm
48" / 26 AWG Wire
Pin Out
Wire Color
Function
Red
Vcc
Black
Ground
White
Inverted Open
Collector
RoHS
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 12/06
Page 1 of 3