OPB700_14 Datasheet, PDF (1/5 Pages) OPTEK Technologies – Reflective Object Sensor

Reflective Object Sensor
OPB700Z, OPB700ALZ, OPB701Z, OPB701ALZ
Features:
• Low profile to facilitate stacking
• Low cost plastic housing
• Choice of phototransistor or photodarlington output
• #26 AWG lead wire in 4” (101 mm), or 18” (457 mm) lengths
Product Photo Here
Description:
OPB700 and OPB700ALZ sensors consist of an infrared emitting diode and a NPN silicon phototransistor,
mounted side-by-side on converging optical axes in a black plastic housing.
OPB701 and OPB701ALZ sensors consist of an infrared emitting diode and a NPN silicon photodarlington,
mounted side-by-side on converging optical axes in a black plastic housing.
The interconnect wires for these devices are are UL approved #26 AWG, with Teflon insulation, stripped and
tinned. The OPB700 and OPB701 have 4” (101 mm) wire length while the OPB700ALZ and OPB701ALZ have
18” (457 mm) wire length.
Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• Non-contact reflective object sensor
• Assembly line automation
• Machine automation
• Machine safety
• End of travel sensor
• Door sensor
Part Number
OPB700Z
OPB700ALZ
OPB701Z
OPB701ALZ
LED Peak
Wavelength
890 nm
Ordering Information
Sensor
Reflection Distance
Inch (mm)
Transistor
Darlington
0.200" (5.08mm)
Lead Length /
Spacing
4" / 26 AWG Wire
18" / 26 AWG Wire
4" / 26 AWG Wire
18" / 26 AWG Wire
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 1 02/07
Page 1 of 5