OPB700TX Datasheet, PDF (1/2 Pages) OPTEK Technologies – Hi-Reliability Reflective Object Sensor

Product Bulletin OPB700TX
February 1997
Hi-Reliability Reflective Object Sensor
Types OPB700TX, OPB700TXV
ORANG
WHITE
GREEN
BLUE
Features
• Non-contact switching
• Low profile to facilitate stacking
• Hermetically sealed components
• Components processed to Optek’s
screening program patterned after
MIL-PRF-19500 for TX and TXV
devices
• 24.0 inches (457.2mm) minimum
length lead wires conforming to
MIL-W-16878
Description
The OPB700TX and OPB700TXV
consist of gallium aluminum arsenide
LED’s and silicon phototransistors
mounted side-by side on converging
optical axes in a high temperature black
plastic housing. The phototransistor
responds to the radiation from the LED
only when a reflective object passes
within its field of view. Lead wires are
#26 AWG polytetraflouroethylene (PTEF)
insulated conforming to MIL-W-16878.
Typical screening and lot acceptance
tests are provided on page 13-4.
Absolute Maximum Ratings (T_A = 25^o C unless otherwise noted)
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65^o C to +125^o C
Storage Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65^o C to +150^o C
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW⁽¹⁾
Output Phototransistor
Collector-Emitter Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 V
Emitter-Collector Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW⁽¹⁾
Notes:
(1) Derate linearly 1.00 mW/^o C above 25^o C.
(2) Measured using an Eastman Kodak neutral white test card having 90% diffuse
reflectance as a reflective surface.
(3) Crosstalk (ICX) is the collector current measured with the indicated current in the input diode
and no reflecting surface.
(4) “d”is the distance from the assembly head to the reflective surface.
(5) Methanol or isopropyl alcohols are recommended as cleaning agents.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
13-36
[phone]
Fax [phone]