OPB695 Datasheet, PDF (1/5 Pages) OPTEK Technologies – Photologic Optical Flag Switch

Product Bulletin OPB695
January 2006
Photologic^® Optical Flag Switch
Types OPB695, OPB696, OPB697, OPB698 Series
Features
• Photologic^® output
• Four output options
• Mechanical switch replacement
• 3-pin connector (Ho Tien L2561-03),
Molex compatible connector 5102
series housing and 5103 series
terminal
Description
The OPB695 series flag switches consist
of an infrared emitting diode and a
monolithic integrated circuit, which
incorporates a photodiode, a linear
amplifier, and a Schmitt trigger. A lever
arm actuated flag interrupts the light
beam switching the output between
states that can readily drive logic gates.
This switch is designed to easily snap
mount into a 0.037" ± 0.001" (0.94 mm)
thick material with a rectangular opening
of 0.320" ± 0.003" x 0.472" (8.13 mm x
11.99 mm) minimum. Insertion into the
punched side of metal is recommended.
Customized lever arms and spring
torques can be designed for specific
applications.
PINOUT
Pin 1: VCC
Pin 2: Output
Pin 3: GND
Absolute Maximum Ratings (T_A = 25^o C unless otherwise noted)
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40^o C to +100^o C
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40^o C to +100^o C
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (1µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Reverse DC Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW⁽¹⁾
Output Photologic^®
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Duration of Output Short To VCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.00 sec
Voltage at Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Low Level Output Current (sinking) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 mW⁽²⁾
Notes:
(1) Derate linearly 1.33 mW/^o C above 25^o C.
(2) Derate linearly 2.50 mW/^o C above 30^o C.
The device features TTL/LSTTL
compatible logic level output which can
drive up to 10 TTL loads over a voltage
range from 4.5 V to 16 V.
For RoHS compliant devices add "Z" to the end of the
part number: OPB695Z
Optek Technology, Inc.
RoHS
1215 W. Crosby Road
Carrollton, Texas 75006
12-62
[phone]
Fax [phone]