OPB100Z Datasheet, PDF (1/3 Pages) OPTEK Technologies – Optical Emitter and Sensor Pair

Optical Emitter and Sensor Pair
OPB100Z, OPB100EZ, OPB100SZ
Features:
• 890 nm infrared LED emitter
• Silicon phototransistor sensor
• Snap-in mounting
• Variable sensing distance over 36” (91.4 cm)
• Low profile package
• 24” (61.0 cm) wire leads
Description:
The OPB100 series consists of an infrared LED (OPB100EZ) and phototransistor (OPB100SZ) in separate
plastic housings. The low cost, snap-in design requires no screws or other mounting hardware for ease of
installation.
The emitter and sensor are not apertured, which allows separation distances in excess of 36” (91.4 cm) without
concern for precise alignment. The front side clip allows mounting of the product to any 0.062” (1.57 mm) thick
material.
This product is designed for general switching and low-speed data communications applications.
Applications:
• Non-contact reflective object
• Non-contact interruptive sensing
• Assembly line automation
• Machine automation
• Machine safety
Emitter (LED)
Part
Number
OPB100Z
OPB100-EZ
OPB100-SZ
Ordering Information
LED Peak
Wavelength
Sensor
Lead Length /
Spacing
880 nm
Transistor 24" / 26 AWG Wire
Phototransistor
Color/Pin
Red-1
Black-2
White-3
Green-4
Description
Anode
Cathode
Collector
Emitter
Red
White
Symbolize Cover
26 AWG
UL Rated
SNAP BODY
Black
Green
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A.1 01/06
Page 1 of 3