OPB100EZ_14 Datasheet, PDF (1/3 Pages) OPTEK Technologies – Optical Emitter and Sensor Pair

Optical Emitter and Sensor Pair
OPB100Z, OPB100-EZ, OPB100-SZ
Features:
• Infrared LED emitter
• Silicon phototransistor sensor
• Snap-in mounting
• Variable sensing distance over 36” (91.4 cm)
• Low profile package
• 24” (61.0 cm) wire leads
Description:
The OPB100Z series consists of an infrared LED (OPB100-EZ) and phototransistor (OPB100-SZ) in separate
plastic housings. The low cost, snap-in design requires no screws or other mounting hardware for ease of
installation.
The emitter and sensor are not apertured, which allows separation distances in excess of 36” (91.4 cm) without
concern for precise alignment. The front side clip allows mounting of the product to any 0.059” (1.50 mm) thick
material.
This product is designed for general switching and low-speed data communications applications.
Applications:
• Non-contact reflective object
• Non-contact interruptive sensing
• Assembly line automation
• Machine automation
• Machine safety
Emitter (LED)
Part
Number
Ordering Information
LED Peak
Lead Length /
Wavelength Sensor
Spacing
OPB100-EZ
OPB100-SZ
880 nm
24" / 26 AWG
Wire
Transistor
OPB100Z Contains both OPB100-EZ & OPB100-SZ
Phototransistor
Color/Pin
Red-1
Black-2
White-3
Green-4
Description
Anode
Cathode
Collector
Emitter
Red
White
Symbolize Cover
26 AWG
UL Rated
Black
Green
0.335 [8.51]
Ø0.190 [Ø4.83]
Hole Pattern
Ø0.150 [Ø3.81]
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue C 2/2013
Page 1 of 3