OPA742 Datasheet, PDF (1/1 Pages) OPTEK Technologies – 1 Watt Light Spot on Anotherm Linear Heat Spreader with Lens

OPA742 Series
1 Watt Light Spot on
Anotherm Linear Heat Spreader with Lens
OPA742 Series
• 1 watt LED on round substrate
• Mono-color per strip (Blue, Green, Red, Yellow, White)
• Component beam angle option 23°
• Universal connector (Tyco 2-292173-2 mates with 173977-2)
• RoHS Compliant
Product Photo Here
OPA742_ (23° Beam Angle)
The OPA742 Series are designed for areas where lighting intensity and reliability
are essential. The light beam angle of 23° is ideal for illuminating areas close or a long distances from the device
while requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light
assembly in the industry.
For custom colors and design contact your OPTEK representative.
Electrical / Optical Characteristics: T_A=25°C, I_F=350mA
Part Number Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle
OPA742Y23
2.5
22
OPA742B23
3.6
8
OPA742G23
3.6
41
23°
OPA742R23
2.5
30
OPA742W23
3.6
41
Color
Yellow
Blue
Green
Red
White
Dominant Wavelength
587 nm
470 nm
530 nm
625 nm
6,500°K
+ Voltage
Ground
OPA742_
See OVSP_BCR4 for
component specifications
RoHS
DO NOT LOOK DIRECTLY AT LED
WITH UNSHIELDED EYES OR
DAMAGE TO RETINA MAY
OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 04/06
Page 1 of 1