OPA729 Datasheet, PDF (1/1 Pages) OPTEK Technologies – 10 Watt Light Bar on Anotherm Linear Heat Spreader

OPA729 Series
10 Watt Light Bar on
Anotherm Linear Heat Spreader
OPA729 Series
• 10, 1 watt LEDs per strip, can be linked with other OPA729’s
• Mono-color per strip (Blue, Green, Red, Yellow, White)
• Two component beam angle options (120° or 40°)
• Power connected to either end
• Universal connector (Tyco 2-292173-2 mates with 173977-2)
• RoHS Compliant
OPA729_ (120° Beam Angle)
Product Photo Here
OPA729_D (40° Beam Angle)
The OPA729 Series are designed for areas where lighting intensity and reliability
are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while
requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in
the industry.
For custom colors and design contact your OPTEK representative.
Electrical / Optical Characteristics: T_A=25°C, I_F=700mA
Part Number
Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle
OPA729Y
12.5
350
OPA729B
18.0
90
OPA729G
18.0
480
120°
OPA729R
12.5
260
OPA729W
18.0
480
OPA729YD
12.5
350
OPA729BD
18.0
90
OPA729GD
18.0
480
40°
OPA729RD
12.5
260
OPA729WD
18.0
480
Color
Yellow
Blue
Green
Red
White
Yellow
Blue
Green
Red
White
Dominant Wavelength
587 nm
470 nm
530 nm
625 nm
6,500°K
587 nm
470 nm
530 nm
625 nm
6,500°K
See OVSP_BCR4 for component specifications
OPA729_
See OVSP_4CR44 for component specifications
OPA729_D
RoHS
+ Voltage
Ground
DO NOT LOOK DIRECTLY AT LED WITH
UNSHIELDED EYES OR DAMAGE TO RETINA
MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 04/06
Page 1 of 1