OP265_06 Datasheet, PDF (1/4 Pages) OPTEK Technologies – Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode
OP265, OP266 Series
(A, B, C, D, W)
Features:
• T-1 (3 mm) package style
• Choice of narrow or wide irradiance pattern
• Choice of dome or flat lens
• Mechanically and spectrally matched to other OPTEK devices
• Higher power output than GaAs at equivalent drive currents
• 890 nm diodes
Description:
Each device in the OP265 and OP266 series is a high intensity gallium arsenide infrared emitting diode (GaAIAs)
that is molded in an IR transmissive clear or amber-tinted epoxy package with either a dome or flat lens. Devices
feature narrow and wide irradiance patterns and a variety of electrical characteristics. The small T-1 package style
makes these devices ideal for space-limited applications.
OP265 devices conform to the OP505 and OP535 series devices. OP266 devices conform to OP506 series
devices.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Applications:
• Space-limited applications
• Applications requiring coupling
efficiency
• Battery-operated or voltage-limited
applications
Ordering Information
Part
LED Peak Output Power (mW/ I_F (mA) Total Beam Lead
Number Wavelength
cm²) Min / Max
Typ / Max Angle Length
OP265A
OP265B
OP265C
OP265D
OP265W
OP266A
OP266B
OP266C
OP266D
OP266W
890 nm
2.70 / NA
1.65 / 4.70
0.54 / 3.30
0.54 / NA
1.00 / NA
2.70 / NA
1.65 / 4.70
0.54 / 3.30
0.54 / NA
1.00 / NA
18°
20 / 50
90°
0.50"
18°
90°
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 07/06
Page 1 of 4