OP140_14 Datasheet, PDF (1/5 Pages) OPTEK Technologies – Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode
OP140, OP145 Series
Features:
• IR-transmissive plastic package
• Side-looking package for space-limited applications
• Wide irradiance pattern
• Mechanically and spectrally matched to other OPTEK products
Description:
Each device in this series is a high intensity gallium arsenide infrared emitting diode that is suited for use as a
PCBoard mounted slotted switch or an easy mount PCBoard interrupter.
Each OP140 (A, B, C, D) and OP145 (A, B, C, D) device is a domed-lens 935 nm diode that is molded in an IR-
transmissive plastic side-looking package.
OP140 is mechanically and spectrally matched to the OP550 series of phototransistors and the OP560 series of
photodarlingtons. OP145 is mechanically and spectrally matched to the OP555 and OP565 series devices.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Applications:
• Space-limited applications
• PCBoard mounted slotted switch
• PCBoard interrupter
Part
Number
OP140A
OP140B
OP140C
OP140D
OP145A
OP145B
OP145C
OP145D
Ordering Information
LED Peak
Wavelength
Lens
Type
Total Beam
Angle
935 nm
Domed
40°
Lead
Length
min of
0.50"
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 04/2012
Page 1 of 5