OP130_06 Datasheet, PDF (1/4 Pages) OPTEK Technologies – Hermetic Infrared Emitting Diode

Hermetic Infrared Emitting Diode
OP130 Series
Features:
• TO-46 hermetically sealed package
• Focused and non-focused optical light pattern
• Enhanced temperature range
“W”
• Mechanically and spectrally matched to other OPTEK devices
• Choice of power ranges
• Choice of narrow or wide irradiance pattern
Description:
Each OP130 series device is a 935 nm gallium arsenide (GaAs) infrared LED mounted in a hermetically sealed
TO-46 package that provides an enhanced temperature range with a variety of power ranges The TO-46 housing
also offers high power dissipation and superior protection for hostile environments.
Each OP130 device has a narrow beam with an inclusive angle at half power points of 18°. Each OP130W series
device has a broad irradiance pattern of 50° at half power points, providing relatively even illumination over a large
area. These devices are designed to efficiently operate with OP800, OP593, OP598 and OP599 phototransistors
or the OP830 photodarlington.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• Non-contact reflective object sensor
• Assembly line automation
• Machine automation
• Machine safety
• End of travel sensor
• Door sensor
Ordering Information
Part LED Peak
Number Wavelength
Output Power
(mW/cm²)
Min / Max
Lens Total Beam
Type Angle
OP130
1.0 / NA
OP131
OP132
3.0 / NA
4.0 / NA
Dome
18°
OP133
935 nm
OP130W
5.0 / NA
1.0 / NA
OP131W
OP132W
3.0 / NA
4.0 / NA
Flat
50°
OP133W
5.0 / NA
Lead
Length
(Min)
0.50"
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 05/06
Page 1 of 4